Installation
Trace the sink outline on the countertop do not cut along this line.
Draw a line 1 cm inside the sink outline.
Measure the cut-out line you just drew and compare it to all dimensions (double-check)
Using a 2" hole saw, Drill a pilot hole inside the cutting line.
Using a jigsaw, cut along the inside line to cut the opening in the countertop.
With the sink in the upside-down position, place a continuous and generous bead of silicone sealant around the entire perimeter of the rim. This serves as a watertight seal.
Lift sink, turn face up and lower into the countertop cutout opening. Wipe excess sealant from perimeter with a wet cloth
DRILLING TAP HOLE Invert the Sink, Use the marking to Drill the Hole with Wood Cutting Bit
